Ballistic Plate K3B “Turkuć”
"Łasica" – Plate Carrier Multicam
lub
„Gronostaj”
The “Turkuć” K3B-class ballistic plate, compliant with the PN-V-87000:2011 standard, was designed as a stand-alone protective plate that does not require an additional soft ballistic insert.
It provides effective protection against 5.56×45 mm SS109 ammunition with a bullet weight of 4.0 g and a velocity of 950 m/s ±15 m/s, in accordance with the requirements of Class K3B of the PN-V-87000:2011 standard.
The “Turkuć” K3B ballistic plates were tested at the accredited Laboratory for Small Arms and Protective Equipment Testing at the Military Institute of Armament Technology (WITU) (PCA No. AB 171).
The plate was tested under dry conditions, after exposure to rain, and at extreme temperatures of -40°C and +50°C, with 6 shots fired at each plate. The recorded dynamic deflections ranged from 4 to 23 mm.
“Turkuć” combines a high level of protection with low weight and an ergonomic design. The SAPI M-sized plate weighs approximately 2.1–2.2 kg, providing a favorable weight-to-protection ratio. The contoured design makes it easier to adjust the plate to the user’s body shape and improves comfort during prolonged use.
The plate is intended for both uniformed services personnel and demanding civilian users seeking proven protection against rifle ammunition.
Each batch of 250 units undergoes ballistic testing in accordance with the requirements applied to deliveries to the Polish Armed Forces.
The plate has undergone comprehensive ballistic testing. The product is available on the civilian market—purchase and possession do not require a permit or license.
- Ballistic resistance: K3B PN-V-87000:2011 (Test report 130/2026-U/ZCU2/07/0045/2026)
- Warranty: 10 years
- Dynamic deflection: 4-23 mm
- Design: Stand Alone
- Sapi M – height 320 mm, width 245 mm, thickness 22 mm, weight 2.1 kg ± 100 g.
- Sapi L – height 340 mm, width 260 mm, thickness 22 mm, weight 2.2 kg ± 100 g.
Standard colors:
- black
- camo pattern 93
- blue
- coyote brown
Additional options (additional fee PLN 150):
- custom color (e.g. pink, yellow, etc.)
- personalization – cut-out logo or inscription
Due to the process of personalizing the plate, the delivery time can be up to 7 days.
- Courier shipment - free
- Parcel Locker InPost - free
The products offered in our store are free from defects and legally introduced to the Polish market, and the Seller is responsible for non-compliance with the contract in accordance with the Consumer Rights Act. In the case of products covered by the manufacturer's warranty, the warranty does not limit the rights of the Customer under other regulations. The customer can submit a complaint both by traditional mail and by e-mail to the address biuro@astriva.pl, and the response to the complaint will be given within 14 days. The technical characteristics of the products come from the manufacturers, and their correct assembly and commissioning require appropriate qualifications.
Gwarancja Niezawodności: Proces Badań Balistycznych "Biegacz" K2
Quality that protects life
Our covers K2 “Biegacz” with Successfully passed all the tests, meeting the criteria standards PN-V- 87000:2011 and demonstrating a high level of reliability even under extreme conditions of use. Plate deflection was located in the compartment 26—31 mm, which remains below the permissible limit of 45 mm specified in the current standard.
This kind of comprehensive examination is crucial for us — not only as a formal requirement, but as proof of the quality and durability of a product that can decide human life in real conditions.
How do we test K2 ballistic cartridge?
Learn the detailed process of verifying the ballistic parameters of the “Runner” model. From strict legal requirements, to climate tests, to an independent expert assessment of each shot.
Compliance with Standard PN-V- 87000:2011
Before our product reaches the market, it must undergo rigorous ballistic tests, in accordance with the requirements of the Polish standard MON-V- 87000:2011. This standard specifies the test procedures for ballistic shields, classifying them according to their level of protection, and describes in detail the conditions that must be met during testing in order for the results to be reliable and comparable. These tests shall include ballistic resistance tests on a randomly selected group of shields from a given production batch.
Climate and Humidity Testing
Plates K2 “Biegacz” passed 4 series of rigorous trials in an accredited Laboratory of Research of Small Arms and Security Guards WITU. Each test was carried out on independent sets of plates under the conditions of:
Dry conditions — reference samples.
Irrigation simulation — assessment of the effect of moisture on the composite.
Heat up (+50°C) — Imitation of a hot climate.
Cool down (-40°C) — mapping Arctic conditions.
Impact Parameter Control
Each of the tests included 6 shots in precisely defined places on the board, according to the arrangement indicated in the standard, which allows to evaluate both the point resistance and the structural behavior of the shield after repeated firing. The key parameter was the preservation of a strictly defined projectile speed — in the case of the K2 class: 420 ± 15 m/s — with a shot distance of exactly 5 meters.
Methodology and Expert Supervision
A total of 48 shots (7.62x25mm P-shell ammunition) were fired during the tests under controlled test conditions. Each trial was evaluated independently by 2 experts conducting research. The evaluation took into account measurements of the velocity of the projectile and the subsurface depression under the cover formed as a result of the deformation of the plate.
Documentation from the WITU Laboratory
See the results of our ballistic tests up close. The gallery presents the state of the shields after impacts with AP missiles, the structure of composite materials and the course of research in climatic chambers.
Gwarancja Niezawodności: Proces Badań Balistycznych „Chrabąszcz” K5A
Quality that protects life
Our covers K5A “Chrabąszcz” from Successfully passed all the tests, meeting the criteria standards PN-V- 87000:2011 and demonstrating a high level of reliability even under extreme conditions of use. Plate deflection was located in the compartment 26—31 mm, which remains below the permissible limit of 45 mm specified in the current standard.
This kind of comprehensive examination is crucial for us — not only as a formal requirement, but as proof of the quality and durability of a product that can decide human life in real conditions.
How do we test K5A ballistic cartridge?
Learn the detailed process of verification of ballistic parameters of the “Chrabąszcz” model. From strict legal requirements, to climate tests, to an independent expert assessment of each shot.
Compliance with Standard PN-V- 87000:2011
Before our product reaches the market, it must undergo rigorous ballistic tests, in accordance with the requirements of the Polish standard MON-V- 87000:2011. This standard specifies the test procedures for ballistic shields, classifying them according to their level of protection, and describes in detail the conditions that must be met during testing in order for the results to be reliable and comparable. These tests shall include ballistic resistance tests on a randomly selected group of shields from a given production batch.
Climate and Humidity Testing
Plates K5A “Chrabaszcz” passed 4 series of rigorous trials in an accredited Laboratory of Research of Small Arms and Security Guards WITU. Each test was carried out on independent sets of plates under the conditions of:
Dry conditions — reference samples.
Irrigation simulation — assessment of the effect of moisture on the composite.
Heat up (+50°C) — Imitation of a hot climate.
Cool down (-40°C) — mapping Arctic conditions.
Impact Parameter Control
Each of the tests included 1 shot in a precisely defined place on the board, according to the arrangement indicated in the standard. The key parameter was the preservation of a strictly defined projectile speed — in the case of the K5A class: 820 ± 15 m/s — with a shot distance of exactly 10 meters.
Methodology and Expert Supervision
A total of 8 shots (7.62x51 mm AP projectile ammunition) were fired during the tests under controlled test conditions. Each trial was evaluated independently by 2 experts conducting research. The evaluation took into account measurements of the velocity of the projectile and the subsurface depression under the cover formed as a result of the deformation of the plate.
Documentation from the WITU Laboratory
See the results of our ballistic tests up close. The gallery presents the state of the shields after impacts with AP missiles, the structure of composite materials and the course of research in climatic chambers.
Gwarancja Niezawodności: Proces Badań Balistycznych kamizelki "Łasica"
Dokumentacja z Laboratorium WITU
Zobacz wyniki naszych prób balistycznych z bliska.
Choose proven ballistic protection.
Our products are created by specialists with many years of experience in the fields of ballistics, biomechanics, and materials engineering. Every product is tested by independent experts in both laboratory conditions and in a real-world environment before it goes on sale.
