ASTRIVA Ballistic Mat, 80 × 200 cm
"Łasica" – Plate Carrier Multicam
lub
„Gronostaj”
ASTRIVA Ballistic and Fragmentation Protection Mat, 80 × 200 cm – FB2 / K2
The ASTRIVA ballistic and fragmentation protection mat is designed as a multifunctional protection system intended to secure infrastructure, vehicles, and positions exposed to ballistic and fragmentation threats.
With dimensions of 200 × 80 cm, the mat is ideal for shielding doors, windows, and other openings in buildings. Its flexible design allows it to be folded, rolled up, and quickly deployed in areas requiring additional protection.
The mat is equipped with integrated carrying handles that facilitate its transport and allow the structure to be used as an emergency stretcher for evacuating the wounded, provided that the appropriate load capacity is confirmed. Additionally, the MOLLE strap system allows for attaching equipment and connecting several mats to form larger protective surfaces.
The product is available in two ballistic resistance variants:
FB2 – PN-EN 1522 – a protective system designed to stop 9 × 19 mm Parabellum ammunition traveling at a velocity of 400 ± 10 m/s. Thanks to the use of a lightweight UHMWPE polyethylene composite, the weight of the complete mat is approximately 6.64 kg.
K2 – PN-V-87000:2011 – a protective system designed to stop 7.62 × 25 mm TT ammunition, in accordance with the requirements of Class K2 of the Polish standard. The weight of the complete mat is approximately 10.80 kg.
Both variants feature a flexible design, a large protective surface area, and the ability to be folded and unfolded repeatedly. The mats can provide additional protection against selected threats associated with FPV drone attacks, gunfire, and shrapnel; however, resistance to specific shrapnel and explosive threats requires separate verification.
The product is intended for the Armed Forces, uniformed services, entities responsible for infrastructure protection, and civilian users.
Specifications
- Dimensions: 2000 × 800 mm
Protective area: 1.6 m²
Construction: flexible, foldable
Ballistic material: UHMWPE composite
Available variants: FB2 / K2
Carrying handles: yes
MOLLE system: yes
Mats can be connected: yes
Manufactured in Poland
FB2 variant:
- Ballistic resistance: FB2 level parameters per PN-EN 1522
Ammunition: 9 × 19 mm Parabellum
Projectile velocity: 400 ± 10 m/s
Surface weight of the insert: 2.9 kg/m²
Weight of the ballistic insert: 4.64 kg
Weight of the complete mat: approximately 6.64 kg
Variant K2:
- Ballistic resistance: K2 PN-V-87000:2011
- Ammunition: 7.62 × 25 mm TT
- Surface weight of the insert: 5.5 kg/m²
- Weight of the ballistic insert: 8.80 kg
- Weight of the complete mat: approximately 10.80 kg
Applications
- Ballistic shields for windows, doors, and passageways
- Additional protection for vehicles and their passenger compartments
- Mobile shields for positions and infrastructure
- Splinter-resistant shields upon confirmation of resistance to specific threats
- Emergency evacuation stretchers upon verification of handle strength
- Protective mats for field applications
- Modular ballistic protection systems
Upon individual request, mats can be manufactured in other dimensions, shapes, and configurations, tailored to the user’s requirements.
ASTRIVA – Polish engineering, research, and production of ballistic protection.
Ballistic resistance: FB2 – PN-EN 1522 (Test Report 133/2026-U/ZCU2/07/0040/2026) K2 PN-V-87000:2011 (Test Report 46/2026-U/ZCU2/07/00220/2026) Warranty: 10 years
Dimensions: 2000 × 800 mm
Protective area: 1.6 m²
Variant FB2: Weight of ballistic insert: 4.64 kg (weight of complete mat: approximately 6.64 kg)
Variant K2: Weight of ballistic insert: 8.80 kg (weight of complete mat: approximately 10.80 kg)
Standard colors: black (style 93), Multicam, Ranger Green
Due to the process of personalizing the plate, the delivery time can be up to 7 days.
- Courier shipment - free
- Parcel Locker InPost - free
The products offered in our store are free from defects and legally introduced to the Polish market, and the Seller is responsible for non-compliance with the contract in accordance with the Consumer Rights Act. In the case of products covered by the manufacturer's warranty, the warranty does not limit the rights of the Customer under other regulations. The customer can submit a complaint both by traditional mail and by e-mail to the address biuro@astriva.pl, and the response to the complaint will be given within 14 days. The technical characteristics of the products come from the manufacturers, and their correct assembly and commissioning require appropriate qualifications.
Gwarancja Niezawodności: Proces Badań Balistycznych "Biegacz" K2
Quality that protects life
Our covers K2 “Biegacz” with Successfully passed all the tests, meeting the criteria standards PN-V- 87000:2011 and demonstrating a high level of reliability even under extreme conditions of use. Plate deflection was located in the compartment 26—31 mm, which remains below the permissible limit of 45 mm specified in the current standard.
This kind of comprehensive examination is crucial for us — not only as a formal requirement, but as proof of the quality and durability of a product that can decide human life in real conditions.
How do we test K2 ballistic cartridge?
Learn the detailed process of verifying the ballistic parameters of the “Runner” model. From strict legal requirements, to climate tests, to an independent expert assessment of each shot.
Compliance with Standard PN-V- 87000:2011
Before our product reaches the market, it must undergo rigorous ballistic tests, in accordance with the requirements of the Polish standard MON-V- 87000:2011. This standard specifies the test procedures for ballistic shields, classifying them according to their level of protection, and describes in detail the conditions that must be met during testing in order for the results to be reliable and comparable. These tests shall include ballistic resistance tests on a randomly selected group of shields from a given production batch.
Climate and Humidity Testing
Plates K2 “Biegacz” passed 4 series of rigorous trials in an accredited Laboratory of Research of Small Arms and Security Guards WITU. Each test was carried out on independent sets of plates under the conditions of:
Dry conditions — reference samples.
Irrigation simulation — assessment of the effect of moisture on the composite.
Heat up (+50°C) — Imitation of a hot climate.
Cool down (-40°C) — mapping Arctic conditions.
Impact Parameter Control
Each of the tests included 6 shots in precisely defined places on the board, according to the arrangement indicated in the standard, which allows to evaluate both the point resistance and the structural behavior of the shield after repeated firing. The key parameter was the preservation of a strictly defined projectile speed — in the case of the K2 class: 420 ± 15 m/s — with a shot distance of exactly 5 meters.
Methodology and Expert Supervision
A total of 48 shots (7.62x25mm P-shell ammunition) were fired during the tests under controlled test conditions. Each trial was evaluated independently by 2 experts conducting research. The evaluation took into account measurements of the velocity of the projectile and the subsurface depression under the cover formed as a result of the deformation of the plate.
Documentation from the WITU Laboratory
See the results of our ballistic tests up close. The gallery presents the state of the shields after impacts with AP missiles, the structure of composite materials and the course of research in climatic chambers.
Gwarancja Niezawodności: Proces Badań Balistycznych „Chrabąszcz” K5A
Quality that protects life
Our covers K5A “Chrabąszcz” from Successfully passed all the tests, meeting the criteria standards PN-V- 87000:2011 and demonstrating a high level of reliability even under extreme conditions of use. Plate deflection was located in the compartment 26—31 mm, which remains below the permissible limit of 45 mm specified in the current standard.
This kind of comprehensive examination is crucial for us — not only as a formal requirement, but as proof of the quality and durability of a product that can decide human life in real conditions.
How do we test K5A ballistic cartridge?
Learn the detailed process of verification of ballistic parameters of the “Chrabąszcz” model. From strict legal requirements, to climate tests, to an independent expert assessment of each shot.
Compliance with Standard PN-V- 87000:2011
Before our product reaches the market, it must undergo rigorous ballistic tests, in accordance with the requirements of the Polish standard MON-V- 87000:2011. This standard specifies the test procedures for ballistic shields, classifying them according to their level of protection, and describes in detail the conditions that must be met during testing in order for the results to be reliable and comparable. These tests shall include ballistic resistance tests on a randomly selected group of shields from a given production batch.
Climate and Humidity Testing
Plates K5A “Chrabaszcz” passed 4 series of rigorous trials in an accredited Laboratory of Research of Small Arms and Security Guards WITU. Each test was carried out on independent sets of plates under the conditions of:
Dry conditions — reference samples.
Irrigation simulation — assessment of the effect of moisture on the composite.
Heat up (+50°C) — Imitation of a hot climate.
Cool down (-40°C) — mapping Arctic conditions.
Impact Parameter Control
Each of the tests included 1 shot in a precisely defined place on the board, according to the arrangement indicated in the standard. The key parameter was the preservation of a strictly defined projectile speed — in the case of the K5A class: 820 ± 15 m/s — with a shot distance of exactly 10 meters.
Methodology and Expert Supervision
A total of 8 shots (7.62x51 mm AP projectile ammunition) were fired during the tests under controlled test conditions. Each trial was evaluated independently by 2 experts conducting research. The evaluation took into account measurements of the velocity of the projectile and the subsurface depression under the cover formed as a result of the deformation of the plate.
Documentation from the WITU Laboratory
See the results of our ballistic tests up close. The gallery presents the state of the shields after impacts with AP missiles, the structure of composite materials and the course of research in climatic chambers.
Gwarancja Niezawodności: Proces Badań Balistycznych kamizelki "Łasica"
Dokumentacja z Laboratorium WITU
Zobacz wyniki naszych prób balistycznych z bliska.
Choose proven ballistic protection.
Our products are created by specialists with many years of experience in the fields of ballistics, biomechanics, and materials engineering. Every product is tested by independent experts in both laboratory conditions and in a real-world environment before it goes on sale.
